Typical Selections

Open plan office with false ceiling

One of the most popular uses of Artus is for offices. The example here is one with the ceiling 2.7m above the floor. Using the guidance from the British Council of Offices (BCO) Guide, the recommended shape for a perimeter office is 4.5m deep and 6 m wide. A typical Artus selection for this would be:

Densely occupied conference room

Artus is useful for very challenging spaces such as densely occupied conference room with high cooling loads, but where a low noise level is also required. The design strategy is to keep adding Artus units, and running them more slowly, until the required cooling load and noise level is achieved. The example below is for a 30m2 conference room with a high cooling load but also a low noise requirement. A typical Artus selection for this would be:

Bedrooms

A single Artus unit neatly matches the cooling load for a 14m2 bedroom. The low air flow rate gives a very low noise level, even at 100% of the cooling capacity. A typical Artus selection for this would be:

Note. * Calculated with return air 27°C. ** Noise estimates at observer, NR, to be confirmed by an acoustic consultant.